User Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration—3G/4G Router Mode
- Chapter 5. Configuration—WISP Mode
- Chapter 6. Configuration—AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Security Mode
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router
-6-
Chapter 3. Quick Installation Guide
This chapter will show you how to configure the basic functions of your Portable Battery
Powered 3G/4G Wireless N Router using Quick Setup Wizard within minutes.
3.1 Three Typical Working Mode
3G/4G Router Mode
After inserting the 3G/4G Card/Modem to the Router’s 3G/4G USB port and configuring the
Router, the Computers/WiFi Phone/Tablet PC could connect to the Internet. In this mode, the
only wired port of the router works as LAN. The connection between TL-MR3040 and the
computer is shown as the figure below.
WISP Client Router Mode
In this mode, the TL-MR3040 is wirelessly connected to the WISP (Wireless Internet Service
Provider) and share the internet to multiple users.