User Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration—3G/4G Router Mode
- Chapter 5. Configuration—WISP Mode
- Chapter 6. Configuration—AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Security Mode
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router
-14-
¾ If the connection type is Dynamic IP, the next screen will appear as shown in Figure
3-10.
Figure 3-10 Quick Setup – MAC Clone
z If you are visiting the router from the main computer, please select Yes, and then
click Clone MAC Address.
z If you are visiting the router from another computer, rather than the main
computer, please select No, and then enter the main computer’s MAC in the field
WAN MAC Address.
¾ If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-11.
Figure 3-11 Quick Setup - Static IP
z IP Address - This is the WAN IP address seen by external users on the Internet
(including your ISP). Enter the IP address into the field.