User Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration—3G/4G Router Mode
- Chapter 5. Configuration—WISP Mode
- Chapter 6. Configuration—AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Security Mode
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router
-20-
Figure 3-19 Quick Setup – Client
z Wireless Network Name (SSID) - Enter a value of up to 32 characters. Click the
Survey button behind it, you can choose one of searching results to fill in this
field.
z Security Mode – Please refer to the Appendix C: Security Mode.
3. Click Next and you will see the page as shown in Figure 3-20. Click Reboot to reboot the
router and make the settings take effect.
Figure 3-20 Quick Setup – Finish
)
Note:
After the rebooting, please change the PC’s TCP/IP settings to “Use the following IP Address”
and “Use the following DNS Server Addresses” and enter the address and DNS server
address manually, and then reconnect to the network according to
3.2.1Connect to Network. If
Wireless Security is enabled, you need to enter the password you’ve just set to successfully
finish the connecting.