User's Manual

-22-
TL-MR3420
3G/4G Wireless N Router User Guide
• Note - Sometimes the connection cannot be disconnected although you
specify a time to Max Idle Time because some applications visit the
Internet continually in the background.
 Authentication Type - Some ISPs need a specifical authentication type, please
confirm it with your ISP or keep it Auto. There are three choices:
• Auto - The router will have dynamic negotiation with the dialing server and
the Autnentication Type need not to be specified. The default type is Auto.
• PAP - Password Authentication Protocol. This protocol allows the router to
establish authentication with the peer using two handshakes. Select this
option if the ISP requires this authentication type.
• CHAP - Challenge Handshake Authentication Protocol. This protocol allows
the route to establish authentication with the peer using three handshakes
and checking the peer identity periodically. Select this option if the ISP
requires this authentication type.
Click the Connect button to connect to Internet with 3G/4G.
Click the Disconnect button to disconnect to Internet with 3G/4G while connecting
to Internet with 3G/4G.
Click the Advanced button to set up the advanced options.
Click the Save button to save your settings.
Click the Modem Settings button if your 3G/4G USB Modem is not supported by the
Router.
5.2.3 WAN
Choose menu “Advanced
→
Network
→
WAN”, you can configure the IP parameters of the WAN
on the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the router
will automatically get IP parameters from your ISP. You can see the page, shown in
Figure 5-5.