User's Manual

MR0-WR641G 108M Wireless Router User Guide
¾ Supports Virtual Server, Special Application and DMZ host.
¾ Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
¾ Connecting Internet on demand and disconnecting from the Internet when idle for
PPPoE.
¾ Built-in NAT and DHCP server supporting static IP address distributing.
¾ Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC
address filtering.
¾ Supports connecting/disconnecting from the Internet on a specified time of day.
¾ Supports access control, parents and network administrators can establish
restricted access policies based on time of day for children or staff.
¾ Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access
Control List).
¾ Supports Flow Statistics.
¾ Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter.
¾ Ignores Ping packets from WAN or LAN ports.
¾ Supports firmware upgrade.
¾ Supports Web management.
2.3 Panel Layout
2.3.1 The Front Panel
The front panel of the MR0-WR641G consists of several LED indicators, which is
designed to indicate connections. View from left. Table 2-1 describes the LEDs on the
front panel of the router.
Figure 2-1 Front Panel sketch
Name Action Description
Not lit No Power
PWR
Lit up Power on
Lit up The router is initializing
Flashing The router is working properly
SYS
Not lit The router has a hardware error
Not lit There is no wireless device linked to the device
WLAN
Flashing The Wireless function is enabled
Not lit There is no device linked to the corresponding port
Lit up
There is a device linked to the corresponding port but no
activity
WAN,1-4
Flashing There is an active device linked to the corresponding port
Table 2-1 The LEDs description
- 4 -