User Guide Smart Motion Sensor 1910012158 REV1.0.
Contents About This Guide····················································· 1 Introduction································································ 2 Appearance································································ 3 Set Up Your Motion Sensor································ 4 Main Pages·································································· 6 Authentication··························································· 7
About This Guide This guide provides a brief introduction to Motion Sensor and the Kasa app, as well as regulatory information. Please note that features of Motion Sensor may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Introduction With Motion Sensor connected to your Kasa Smart Home Router, your home can use motion sensing to become even smarter, and that makes your life simpler.
Appearance Motion Sensor has an internal LED that changes color according to its status, a sensor, a battery compartment and a wall mount. See the explanation below: Wall Mount Sensor Orange Power up or fail to join the network. Battery Compartment Blue Sensor event or succeed to join the network. Restart/Reset Button: Flashing orange Press and hold for 5 seconds to reset the sensor to factory default settings. Flashing orange and blue Press for 1 second to restart the pairng mode.
Set Up Your Motion Sensor Follow the steps below to set up your Motion Sensor via Kasa for Mobile app. 1. Download and install the Kasa app go to Google Play or the Apple App Store or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet. 2. Log in or sign up with TP-Link ID Open the app. Use your TP-Link ID to log in. If you don’t have a TP-Link ID, tap Create Account. The Kasa app will guide you through the rest. 3.
Set Up Your Motion Sensor Follow the steps below to set up your Motion Sensor via Kasa for Mobile app. 4. Connect to Smart Home Router Remove the screw securing the wall mount and slide the cover down. Insert two batteries to enter pairing mode. 5. Install the sensor if needed It is all set up. You can install the sensor to the wall if needed. The Kasa app will guide you through the whole process of installation.
Main Pages After you successfully set up your Motion Sensor, you will see the home page of the Kasa app. Here you can view the working status of all devices that you've added to Kasa and manage them. Tap on a sensor to check the current status, time of last motion, the current battery level of your sensor. Click on sensor status page to view your device settings.
Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2017 TP-Link Technologies Co.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.
Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements: 당해 무선설비는 운용중 전파혼신 가능성이 있음.
Safety Information • When product has power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. • Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. • Avoid water and wet locations.