User's Manual
Table Of Contents
- Chapter 1. Get to Know About Your Router
- Chapter 2. Configure your Touch P5 as a Router
- 2.1 Connect Your Router
- 2.2 Log into Your Router
- 2.3 Quick Setup
- 2.4 Mode Selection
- 2.5 Wireless Settings
- 2.6 WPS
- 2.7 Guest Network
- 2.8 Parental Controls
- 2.9 Devices Control
- 2.10 Printer Server
- 2.11 DDNS
- 2.12 LAN
- 2.13 DHCP Server
- 2.14 QoS
- 2.15 Clock
- 2.16 Screen Settings
- 2.17 Reboot & Reset
- 2.18 Administrator Password
- 2.19 About
- 2.20 USB Application
- 2.21 Set Up IPv6 Connection
- 2.22 NAT Forwarding
- 2.23 Update the Firmware
- Troubleshooting Guide & FAQ
- Appendix A: Specifications
- Appendix B: Glossary
- 空白页面
2. Immediately press the WPS button of the client device in two minutes.
3. Success will appear on the above screen, which means the client device has successfully connected to the
router.
Option 2 Use the PIN
Use this option if your client device asks for the router’s PIN.
1. Tap Connect to this router via PIN on the above screen of the router to get the router’s PIN, you can use the
default one or generate a new one.
2. On the client device, enter the router’s PIN to connect.
Chapter 2 Configure your Touch P5 as a Router 19