User's Manual

Note:
1) It is recommended to keep the default settings of Internal Port and Protocol if you are not
clear about which port and protocol to use.
2) If the service you want to use is not in the list of Service Type
, you can enter the
corresponding parameters manually. You should verify the ports number that the service
need.
3)
You can add multiple virtual server rules if you want to provide several services in a router.
Please note that the External Port cannot be overlapped.
Done!
Users in the Internet can enter Service Type://WAN IP to visit your local resources. (in this case, enter
http://218.18.232.154 to visit your personal website).
Note:
1)
WAN IP should be a public IP address. For the WAN IP is assigned dynamically by ISP, it is
recommended to apply and register a domain name for the WAN by DDNS. Then you can use
Service Type://Domain Name to visit your local resources
2) If you have changed the default External Port, you should use Service Type://WAN IP:External
Port or Service Type://Domain Name:External Port to visit your local resources
2.22.2 Open Ports Dynamically by Port Triggering
Port triggering can specify a triggering port and its corresponding external ports. When a host in the local network
initiates a connection to the triggering port, all the external ports will be opened for subsequent connections. The router
can record the IP address of the host. When the data from the Internet return to the external ports, the router can forward
them to the corresponding host. Port triggering is mainly applied to online games, VoIPs and video players. Common
applications include MSN Gaming Zone, Dialpad and Quick Time 4 players, etc.
Follow the steps below to configure the port triggering rules:
1. Visit http://tplinkwifi.net
, and log in with the username and password you set for the router.
2. Go to Advanced ->NAT Forwarding -> Port Triggering and click Add.
Chapter 2 Configure your Touch P5 as a Router 59