User's Manual

55
¾ Delete: Select a preset number from 1 to 32 in the list box. Use it to delete a specific preset position
setting.
8.3 Patrol
There are four patrol tours to set for composing different preset positions. Each one lists up to 8 positions
which can be programmed, and the camera moves to the programmed positions sequentially. The
camera stops when it moves to the last preset position.
¾ Tour name: Rename the tour name.
¾ Tour position
z Order: There are 8 orders to select for camera directions.
z Select Pos.: There are preset positions to choose for each order. (For more information about
preset position, please refer to
Section 8.2
.)
z Waiting time: Define how long the camera is needed to stop at this position. The range is 1~99
seconds.
z Set: Click it to save the camera position to a preset number.
z Clear: If a preset position is not needed, select the tour order and click Clear to delete this
position information.
z Clear All: Be careful! When you click Clear All, it will clear out all information of this tour.
¾ Interval: Define the cycle interval between two patrol tours. The interval value is among 0.5, 1, 2, 4,
8, 12 and 24 hours.
¾ Set as default tour: Tick it to set this tour as default.