User's Manual

69
)
Note:
You can set schedule function at Schedule page. (Please go to “Setting  Advanced 
Schedule  Setting”. For more details, please refer to Section 8.8
.)
8.7 Alarm Output
When you click Alarm output on the setting-advanced menu, the Setting menu appears. You can set in
this menu to control the alarm out of I/O port on the rear of the device linked to the alarm detection and
the timer.
Alarm output: To activate the Alarm output function, select On. When you do not use the Alarm output
function, select Off.
¾ Digital output: Select High signal output and Low signal output as your alarm.
¾ Trigger condition: Select the mode of the Alarm output function. You can choose “Alarm” or
“Timer”.
¾ Alarm: Controls alarm output by synchronizing with an external sensor input or the built-in activity
detection function.
z Motion Detection: Click it on for using Motion Detection function as a sensor. You can set
motion detection function at the motion detection function page.
)
Note:
You can set motion detection at motion detection page. (Please go “Setting  Advanced 
Motion detection  Setting”)
)
Note:
Motion Detection works only when the Video mode is set to MPEG4 and the Cropping is set to Off.
z Alarm Input: Select the connected alarm.
9 Alarm input1: The external sensor which is connected to Alarm input1 of the alarm input.