Archer T2UHP User Guide AC600 High Power Wireless Dual Band USB Adapter REV1.1.
Contents About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1. Get to Know About Your Adapter . . . . . . . . . . . . . . . . . . . . . . . 2 1. 1. 1. 2. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This Guide This guide is a complementation of Quick Installation Guide. The Quick Installation Guide instructs you on quick Internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs. When using this guide, please notice that features of the adapter may vary slightly depending on the model and software version you have.
Chapter 1 Get to Know About Your Adapter This chapter introduces what the adapter can do and shows its appearance.
Chapter 1 1. 1. Get to Know About Your Adapter Product Overview TP-LINK’s Wireless USB Adapter connects your notebook or desktop computer to a wireless network for applications such as lag-free video streaming, online gaming, and secure Internet surfing. And the adapter has following features: • The adapter comes with 802.11ac standard, and is compatible with 802.11a/b/g/n/ac products. • The adapter provides USB 2.0 interface.
Chapter 2 Connect to a Computer
Chapter 2 Connect to a Computer Before you begin using your adapter, connect the adapter to a USB port on your computer using the USB cable provided. Note: 1. In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel. 2. The adapter is compatible with a USB 2.0 or USB 1.1 port. After connecting your adapter to the computer, please follow the instructions in the appropriate chapter for your operating system: Windows, Mac OS X, Linux.
Chapter 3 Windows This chapter introduces how to install your adapter’s driver and utility, use your adapter to join a wireless network, manage your adapter, and uninstall your adapter in a Windows system. The adapter is equipped with a Setup wizard, which can guide you through the installation process.
Chapter 3 3. 1. Windows Install Driver and Utility To set up your adapter with several easy steps quickly: 1. Insert the resource CD into your CD drive and run the Autorun.exe from the pop-up AutoPlay window. Select Archer T2UHP and click Install Driver to begin. 2. Follow the step-by-step instructions of the Quick Setup to complete the initial configuration.
Chapter 3 Windows Note: The default setup type is Install Driver Only. You can also select Install TP-LINK Wireless Configuration Utility and Driver for more functions, such as joining a wireless network via TP-LINK Utility or WPS, and managing the adapter.
Chapter 3 Windows 9
Chapter 3 3. 2. Windows Join a Wireless Network You can join a wireless network via Windows built-in Wireless Utility. If you want to use Option 2: TP-LINK Utility or Option 3: WPS (Wi-Fi Protected Setup) to join a wireless network, you need to install the TP-LINK Utility first. Option 1: Windows Wireless Utility You can use the Windows WLAN Autoconfig service (for Windows 7/8/8.1/10) and the Wireless Zero Configuration service (for Windows XP) to join a Wi-Fi network.
Chapter 3 Windows • Windows 7/8/8.1/10 1. Click , or (Network icon) on the taskbar. Select the Wi-Fi network you want to join, and click Connect. Enter the network password when prompted. 2. When the network icon changes to connection. or , it indicates a successful network Note: If you do not want to enter the Wi-Fi password, you can also join a wireless network either by pushing the WPS or QSS button on your router or AP, or entering the PIN of your router when the screen prompts you to do so.
Chapter 3 Windows 2. Select the network you want to join from the list on this screen and click Connect. If you want the adapter to automatically connect to the network next time, select the Connect automatically checkbox. Enter your Wi-Fi password when prompted. Note: If your Wi-Fi network is not displayed in the list, you can try to join it by WPS or by adding a profile in the Profile screen.
Chapter 3 3. 2. 3. Windows WPS (Wi-Fi Protected Setup) WPS can be activated via PBC (Push Button Configuration) and PIN code. Please refer to PBCor PIN below. • PBC Option 1 1. Press the WPS/QSS button on your router or AP. Within 2 minutes, press and hold the WPS button on the adapter until the following screen appears. 2. The following screen indicates a successful connection by WPS. Click OK.
Chapter 3 Windows Option 2 1. Press the WPS/QSS button on your router or AP. 2. Open TP-LINK Utility and click WPS tab. Select Push the button on my access point or wireless router and click Connect. 3. The following screen indicates a successful connection by WPS. Click OK.
Chapter 3 Windows • PIN Option 1 1. Open TP-LINK Utility and click WPS tab. Select Enter the PIN of my access point or wireless router. Enter the PIN of your router or AP. Click Connect. Note: The default PIN of your router or AP is printed on the product label of your router or AP. If you generated a new PIN for your router, please enter the new one. 2. The following screen indicates a successful connection by WPS. Click OK.
Chapter 3 Windows Option 2 1. Open TP-LINK Utility and click WPS tab. Select Enter the PIN of this device into my access point or wireless router. The screen displays a PIN of the adapter, which is generated randomly. Click Connect. 2. Log in to the Web Management page of your router or AP. Go to the WPS page, enter the PIN of the adapter in the corresponding field and click Connect. 3. The following screen indicates a successful connection by WPS. Click OK.
Chapter 3 3. 3. Windows Management TP-LINK Utility provides you with an easy way to manage your adapter. It includes the following sections: Status - View the information of the current Wi-Fi network connection and of the adapter. Profile - Save or manage various connection settings of your Wi-Fi network. Advanced - Turn on or off the SoftAP mode and power saving mode, switch between TP-LINK Utility and Windows Wireless Utility (for Windows XP only).
Chapter 3 3. 3. 2. Windows Profile The Profile screen lets you save and manage different Wi-Fi connection settings as profiles so that you can quickly and simply connect to your network. Moreover, you can join a hidden Wi-Fi network that does not broadcast its SSID by adding a profile, provided that you know its wireless settings, such as SSID, security type, and encryption type.
Chapter 3 Windows • To add a new profile 1. Click the Add button, and then a new window will open. 2. Complete the settings as shown in the following figure, and click Save. Profile Name: Enter a name for your profile, such as Home, Office, Coffee house. Do not enter the profile name that already exists. SSID: Select your Wi-Fi network from the drop-down list or enter your Wi-Fi network name manually. Network Type: Select Infrastructure if you want to connect to a wireless router or an access point.
Chapter 3 Windows Infrastructure: If you select Infrastructure, you are asked to select or enter the corresponding wireless settings, which should be the same as those of your Wi-Fi network. ad hoc: If you select ad hoc, you are asked to configure the wireless settings for your network, including choosing the operating frequency band, the security type, the encryption type and setting a security key. Note: As for Key Index, you can select ASCII or Hexadecimal format from the drop-down list.
Chapter 3 3. 3. 3. Windows Advanced Select wireless configuration tool: In Windows XP, you can either use TP-LINK Utility or Windows wireless configuration tool. While in other operating systems, since you can use both TP-LINK Utility and Windows wireless configuration tool at the same time, this function is disabled. Wireless network adapter switch: If you’ve installed several adapters in your computer, you can switch to another adapter among the drop-down list.
Chapter 3 Windows After switching to SoftAP mode, the SoftAP icon appears in the utility. Click the SoftAP tab, and complete the settings, then click Apply for the settings to take effect. Soft AP mode: Select ON or OFF to enable or disable this function. Internet Connecting Share(ICS): Select a network connection that can access to the Internet from the drop-down list.
Chapter 3 Windows When another wireless device connects to the network shared by your adapter, it will be asked to enter the corresponding security key. IP Address: Displays the IP address of the adapter when it works in SoftAP mode. You can also check if the network shared by your adapter is working properly by checking this IP Address. For example, if the IP Address is 0.0.0.0, it means that the Internet connection is failed. 3. 3. 5.
Chapter 3 Windows Uninstall utility: Go to Start > All Programs > TP-LINK > Uninstall - TP-LINK Wireless Configuration Utility. Follow the on-screen instructions to complete the uninstallation.
Chapter 4 Mac OS X This chapter introduces how to install your adapter’s driver and utility, use your adapter to join a wireless network, manage your adapter, and uninstall your adapter in Mac OS X.
Chapter 4 4. 1. Mac OS X Install Driver and Utility We take the steps in Mac OS X 10.10 as an example - the steps may vary slightly for other versions of Mac OS. 1. Insert the CD and run it manually. Open the Archer T2UHP folder. Note: The CD is included in the package. If your CD does not work or your computer doesn’t support the CD, you can also download the driver and utility from the TP-LINK website (http://www.tp-link.com). 2. Open the Mac OS X Driver folder.
Chapter 4 Mac OS X 3. Double click the TP-LINK_Installer.dmg file to open the TP-LINK_Installer. 4. Double click the Installer.pkg file to open the installation wizard. 5. The Install TP-LINK Wireless Utility Wizard window will appear. Click Continue and follow the wizard to continue the installation.
Chapter 4 Mac OS X 28
Chapter 4 Mac OS X 29
Chapter 4 Mac OS X 6. After restarting the computer, the TP-LINK Utility icon will appear on the menu bar in the upper-right corner of the screen. To use the utility to join a Wi-Fi network with your adapter, refer to Join a Wireless Network.
Chapter 4 Mac OS X Note: If the TP-LINK Utility icon does not appear on the menu bar, make sure the USB wireless network adapter is connected properly and its LED is on. 4. 2. Join a Wireless Network There are two options of using the adapter to join a Wi-Fi network. Option 1: TP-LINK Utility TP-LINK Utility lets you easily connect the adapter to a Wi-Fi network and manage the adapter.
Chapter 4 3. After successfully connecting to your network, you will see a symbol your network’s SSID, which indicates a successful connection.
Chapter 4 4. 2. 2. Mac OS X WPS (Wi-Fi Protected Setup) WPS can be activated via PBC (Push Button Configuration) and PIN code. Please refer to PBCor PIN below. • PBC Option 1 1. Press the WPS/QSS button on your router or AP. Within 2 minutes, press and hold the WPS button on the adapter until the following screen appears. 2. The following screen indicates a successful connection by WPS.
Chapter 4 Mac OS X Option 2 1. Press the WPS/QSS button on your router or AP. 2. Within 2 minutes, open TP-LINK Utility and click WPS tab. Click PBC.
Chapter 4 Mac OS X 3. The following screen indicates a successful connection by WPS. • PIN 1. Open TP-LINK Utility and click WPS tab. Mark down the PIN displayed on the screen. Select the network you want to join from the WPS AP List and click PIN.
Chapter 4 Mac OS X 2. Within 2 minutes, log in to the Web Management page of your router or AP. Go to its WPS page, enter the PIN of the adapter in the corresponding field and click Connect. 3. The following screen indicates a successful connection by WPS.
Chapter 4 4. 3. Mac OS X Management TP-LINK Utility provides you with an easy way to manage various connection settings of your Wi-Fi network. It includes the following sections: Link Status - View the information of the current Wi-Fi network connection and of the adapter. Profile - Save or manage various Wi-Fi network connection settings. About - View the utility version and the driver version of your adapter.
Chapter 4 Mac OS X type. For details, please refer to the instructions below: To add a new profile, To join a Wi-Fi network, and To manage an existing profile. • To add a new profile 1. Click the ADD button, and then a new window will pop up. 2. Complete the settings as shown in the following figure, and click OK.
Chapter 4 Mac OS X Profile Name - Enter a name for your profile, such as Home, Office, Coffee house. Do not enter the profile name that already exists. SSID - Enter the name of your Wi-Fi network. System Configuration: Select CAM (Constantly Awake Mode) or Power Saving Mode depending on your preference. In Power Saving Mode, the adapter will automatically reduce its power consumption when not being used. You can specify the Tx Power level to adjust the transmit power of the adapter.
Chapter 4 Mac OS X • To manage an existing profile If you want to change the name or the wireless settings of an existing profile, select it and click the EDIT button in the profile screen, and then you can edit the settings of this profile. If you want to delete a profile that you no longer use, select it and click the DELETE button. 4. 4. Uninstall Driver and Utility 1. Insert the CD and run it manually. 2. Go to Archer T2UHP > Mac OS X Driver > TP-LINK_Installer.dmg > Uninstall. command. 3.
Chapter 4 Mac OS X 41
Chapter 5 Linux
Chapter 5 Linux Visit the TP-LINK website at http://www.tp-link.com, and go to Archer T2UHP’s product page. Then find the compatible version of driver in the support page. Download and install the driver on your computer.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE Mark Warning RF Exposure Information This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62209-2. SAR is measured with this device at a separation of 0.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device.
DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干 擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依 電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫 療用電波輻射性電機設備之干擾。 減少電磁波影響，請妥適使用。 於5.25GHz至5.35GHz區域內操作之無線設備的警告聲明 工作頻率5.250~5.
AT EE IE NL BE ES IS NO BG FI IT PL CH FR LI PT CY GB LT RO CZ GR LU SE DE HR LV SI DK HU MT SK Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
