Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter REV1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Exposure Information This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 5 cm from your body. Restricted to indoor use. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs.
250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象 時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電 信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 減少電磁波影響，請妥適使用。 於 5.25GHz 至 5.35GHz 區域內操作之無線設備的警告聲明 工作頻率 5.250~5.
For EU/EFTA, this product can be used in the following countries: AT BE BG HR CY CZ DK EE FI FR DE GR HU IE IT LV LT LU MT NL PL RO PT SK SI ES SE GB IS LI NO CH Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AC1900 High Gain Wireless Dual Band USB Adapter Model No.
CONTENTS Chapter 1 Product Overview ................................................................................. 1 1.1 Introduction ............................................................................................................. 1 1.2 Features .................................................................................................................. 1 1.3 LED Status ..............................................................................................................
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Chapter 1 Product Overview 1.1 Introduction The TP-LINK Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter connects your notebook or desktop computer over Wi-Fi to an 11ac or other network for applications such as lag-free video streaming, online gaming, and secure Internet surfing. 1.2 Features Supports 802.11ac standard Seamlessly compatible with 802.11a/b/g/n/ac products USB 3.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Chapter 2 Connect to a Computer Before you begin using your adapter, connect the adapter to your computer. Option 1: Directly Insert the adapter into a USB port on your computer directly. Option 2: Via the USB Extension Cable Connect the adapter and your computer with the provided USB extension cable. Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Chapter 3 Windows 3.1 Install Driver The Setup Wizard will guide you through the installation procedures. We use the procedures in Windows 7 as an example - the procedures may vary slightly for other versions of Windows. 1. Insert the resource CD into your CD drive and run the Autorun.exe from the pop-up AutoPlay window. Select Archer T9UH and click Install Driver to begin. Note: The CD is included in the package.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide 2. The InstallShield Wizard window displays. Click Next to continue. 3. Click Install. After a few minutes, the installation completes. Click Finish.
Archer T9UH 3.2 AC1900 High Gain Wireless Dual Band USB Adapter User Guide Join a Wireless Network You can use the Windows WLAN Autoconfig service (for Windows 10/8.1/8/7) and the Wireless Zero Configuration service (for Windows XP) to join a Wi-Fi network. Click , or (Network icon) on the taskbar. Select the Wi-Fi network you want to join, and click Connect. Enter your Wi-Fi password when prompted. That’s it, you are connected! The network icon will change to 3.3 or .
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Chapter 4 Mac OS X 4.1 Install Driver and Utility We take the procedures in Mac OS X 10.10 as an example - the procedures may vary slightly for other versions of Mac OS. 1. Insert the CD and run it manually. Open the Archer T9UH folder. Note: The CD is included in the package. If your CD does not work or your computer doesn't support the CD, you can also download the driver and utility from the TP-LINK website (www.tp-link.com).
Archer T9UH 4. AC1900 High Gain Wireless Dual Band USB Adapter User Guide Open the Mac OS X 10.7_10.10 folder, double click the Installer.pkg file to open the installation wizard. 5. The Install TP-LINK Wireless USB Adapter Utility and Driver Wizard window will appear. Click Continue and follow the wizard to continue the installation.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Note: The language of this utility is in accordance with the language of your computer by default, and any change of it is invalid.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide 9
Archer T9UH 6. AC1900 High Gain Wireless Dual Band USB Adapter User Guide After restarting the computer, the TP-LINK utility will pop up automatically. You can use the utility to join a Wi-Fi network with your adapter. For more guidance, please refer to Join a Wireless Network. Note: If the TP-LINK Utility does not pop up automatically, make sure the USB wireless network adapter is connected properly and the LED is on. 4.
Archer T9UH 4.2.1 1. AC1900 High Gain Wireless Dual Band USB Adapter User Guide TP-LINK Utility Double-click (TP-LINK Utility icon) and select Available Network tab. Then select the network you want to join from the list and click Connect. 2. The wireless network security properties screen displays.
Archer T9UH 3. AC1900 High Gain Wireless Dual Band USB Adapter User Guide After successfully connecting to your network, it will switch to Link Status screen automatically, which will show the network status. If you select Available Network tab, you will see a symbol in front of your network’s SSID, which indicates a successful connection. 4.2.2 WPS (Wi-Fi Protected Setup) WPS can be activated via PBC (Push Button Configuration) and PIN. Please refer to PBC or PIN below. PBC Option 1 1.
Archer T9UH 2. AC1900 High Gain Wireless Dual Band USB Adapter User Guide The following screen indicates a successful connection by WPS. Click OK. Option 2 1. Press the WPS/QSS button on your router or AP. 2. Within 2 minutes, open TP-LINK Utility and click WPS tab. Click PBC.
Archer T9UH 3. AC1900 High Gain Wireless Dual Band USB Adapter User Guide The following screen indicates a successful connection by WPS. Click OK.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide PIN 1. Open TP-LINK Utility and click WPS tab. Mark down the PIN displayed on the screen, and click PIN. 2. Within 2 minutes, log in to the Web Management page of your router or AP. Go to its WPS page, enter the PIN of the adapter in the corresponding field and click Connect. 3. 4.3 The following screen indicates a successful connection by WPS. Click OK.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide 4.3.1 Link Status You can view the signal strength of the Wi-Fi network, the MAC address of the adapter and other information of the link status as shown in the following figure. 4.3.2 Profiles The Profiles screen lets you save and manage different Wi-Fi network connection settings as profiles so that you can quickly and simply connect to your network.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide To add a new profile 1. Click the Add button, and then a new window will open. 2. Complete the settings as shown in the following figure, and click OK. Profile Name - Enter a name for your profile, such as Home, Office, Coffeehouse. Do not enter the profile name that already exists. SSID - Enter the name of your Wi-Fi network.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Wireless Network Security Properties: Select or enter the corresponding wireless settings, including Network Authentication, Data Encryption and Network key, which should be the same as those of your Wi-Fi network. Then click OK. To join a Wi-Fi network If you want to join a Wi-Fi network that listed in the profile screen, select the profile and click Apply button in the bottom right corner.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Note: The CD is included in the package. If your CD does not work or your computer doesn't support the CD, you can also download the driver and utility from the TP-LINK website (www.tp-link.com).
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Chapter 5 Linux Visit the TP-LINK website at www.tp-link.com, and go to Archer T9UH’s product page. Then find the compatible version of driver in the support page. Download and install the driver on your computer.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Appendix A: Specifications Normal Interface USB 3.0 Interface Standards IEEE802.11a; IEEE802.11b; IEEE802.11g; IEEE802.11n; IEEE802.1x, IEEE802.11ac Operating System Windows XP, Windows 7, Windows 8, Windows 8.1, Windows 10 Mac OS X 10.7 - 10.10 Linux Throughput 2.4GHz:600Mbps (Maximal) 5GHz: 1300Mbps (Maximal) Data Security WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Frequency* 2.4~2.4835GHz, 5.18~5.24GHz, 5.26~5.32GHz, 5.500~5.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide Appendix B: Glossary 802.11ac - IEEE 802.11ac is a wireless computer networking standard of 802.11.This specification will enable multi-station WLAN throughput of at least 1 gigabit per second. This is accomplished by extending the air interface concepts embraced by 802.11n: wider RF bandwidth, more MIMO spatial streams, multi-user MIMO, and high-density modulation (up to 256 QAM). 802.11n - 802.11n builds upon previous 802.
Archer T9UH AC1900 High Gain Wireless Dual Band USB Adapter User Guide typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name. See also Wireless Network Name and ESSID. WEP - (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-bit or 128-bit or 152-bit shared key algorithm, as described in the IEEE 802.11 standard. To gain access to a WEP network, you must know the key.
