User's Guide

TD851W 150Mbps Wireless N ADSL2+ Modem Router User Guide
5
Name Status Indication
Flash
A wireless device has been successfully added to the network by WPS
function.
On
WPS handshaking is in process and will continue for about 2 minutes.
Please press the WPS button on other wireless devices that you want to
add to the network while the LED is flashing.
WPS
Off
The WPS function is disabled or the wireless device fails to be added to
the network in 2 minutes after WPS function is enabled. Please refer to
4.3.3.1 WPS Settings
for more information.
)
Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.4 Connecting
the Router for more information about how to make Internet connection correctly. If you have
already made a right connection, please contact your ISP to make sure if your Internet service
is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off,
please refer to Note 1. If your ADSL LED is GREEN ON, please check your Internet
configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly. Refer to 4.1 Status
and 4.3.1 Internet for more
information.
2.2 The Back Panel
Figure 2-2
¾ ON/OFF: The power switch for the Router.
¾ POWER: The Power plug is where you will connect the power adapter.