User's Manual

TD-VG3631 300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
31
Figure 4-10
4.4.2.1 Dynamic IP
Select this op
tion, the Modem Router will be able to obtain IP network information dynamically
from a DHCP server provided by your ISP (as shown Figure 4-10). The next configuration is
similar to Dynamic IP over ATM interface (see section 4.4.1.2 Dyn
amic IP)
4.4.2.2 Static IP
Select this option if your ISP provides static IP information to yo
u and you want to use an Ethernet
Interface. You should set static IP address, IP subnet mask, gateway address, DNS Server and
Secondary DNS Server in the screen below. The next configuration is similar to Static IP for WAN
Settings (see section 4.4.1.1 Static IP
)