User's Manual

TD-VG3631 300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
53
4.7.1 SIP Account
Choose “Voice”“SIP Account”, you will see the screen similar to Figure 4-35. SIP accounts are
necessary for making VoIP calls. This section introduces how to setup the SIP(Session Initiation
Protocol) account for your Modem Router.
Figure 4-35
 Profile Name: Displays the profile name of the account.
 Registrar Address: Displays the IP address or domin name of the SIP Registrar server.
 Phone Number: Displays the phone number of the account.
 Status: Displays the status of the account. “Down” means that the account has not been
registered.
 Remove: Check the box and then click the Remove button below so that the very account
will be deleted.
 Edit: Click the Edit button to modify the very account.
To set up an SIP account, click the Add button in Figure 4-35. Configure the following parameters
in Figure 4-36 and then click the Save button. Then an account is added. Please note that the
blanks with red asterisk behind ar
e required to be entered.