User's Manual

TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router User Guide
39
 Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses
of the wireless devices transmitting within your network’s RADIUS.
 Active: If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for
don’t.
 Action: To filter wireless users by MAC Address, select “Allow Association” or “Deny
Association” the follow Wireless LAN station(s) association.
 MAC Address: Enter the MAC Address you wish to filter in the field.
4.4 Advanced Setup
Choose “Advanced Setup”, you can see the next submenus:
Figure 4-24
Click any of them, and you will be able to configure the corresponding function.
4.4.1 Firewall
Choose “Advanced Setup→Firewall” menu, and you will see the next screen (shown in Figure
4-25).
Figure 4-
25
 Firewall: Select this option can automatically detect and block Denial of Service (DoS)
attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.
 SPI: If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual
Server, and ACL WAN side.
4.4.2 Routing
Choose “Advanced Setup→Routing” menu, and you will see the routing information in the next
screen (shown in Figure 4-26).