User's Manual

TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router User Guide
51
connections, it is very flexible for user/host management, bandwidth allocation and resource
optimization. There are two types of VLAN as follows:
1) Port-Based VLAN: Each physical switch port is configured with an access list specifying
membership in a set of VLANs.
2) ATM VLAN: Using LAN Emulation (LANE) protocol to map Ethernet packets into ATM
cells and deliver them to their destination by converting an Ethernet MAC address into an
ATM address.
Figure 4-
42
5) Assign VLAN PVID for each Interface
Click Assign VLAN PVID for each Interface in Figure 4-42, you can assign the PVID for each
interface in the next screen (shown in
Figure 4-43).
Figure 4-43
 PVID: Each physical port has a default VID called PVID (Port VID). PVID is assigned to
untagged frames or priority tagged frames (frames with null (0) VID) received on this port.
6) Define VLAN Group