Specifications
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Software Configuration
- Appendix A: Specification
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router User Guide
45
6RD Border Relay IPv4 Address: The IPv4 address of the border relay router of 6RD tunnel.
Use PVC: Select the PVC from the the drop-down list.
Note:
To enable the function, there should not have any IPv6 WAN connections.
4.4 Advanced Setup
Choose “Advanced Setup”, you can see the next submenus:
Figure 4-33
Click any of them, and you will be able to configure the corresponding function.
4.4.1 Firewall
Choose “Advanced Setup
→
Firewall” menu, and you will see the next screen (shown in Figure
4-34).
Figure 4-34
Firewall: Select this option can automatically detect and block Denial of Service (DoS)
attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.
SPI: If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual
Server, and ACL WAN side.
4.4.2 Routing
Choose “Advanced Se tup
→
Routing” menu, and you will see the routing information in the next
screen (shown in Figure 4-35).