User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Quick Installation Guide
- Chapter 4. Software Configuration
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide
9
Chapter 3. Quick Installation Guide
3.1 Configure PC
After you directly connect your PC to the TD-W8901N or connect your adapter to a Hub/Switch
which has connected to the Router, you need to configure your PC’s IP address. Follow the steps
below to configure it.
Step 1: Click the Start menu on your desktop, right click My Network Places, and then select
Properties (shown in Figure 3-1).
Figure 3-1
Step 2: Right click Local Area C
onnection (LAN), and then select Properties.