User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Quick Installation Guide
- Chapter 4. Software Configuration
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide
31
Figure 4-13
DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN
side.
Note:
If you select Disabled, the DHCP function will not take effect.
Note:
Limited by local law regulations, version for North America doesn’t have region selection option.
4.3.3 Wireless
Choose “Interface Setup→Wireless” menu, and you will see the Wireless screen (shown in
Figure 4-14 ). Please configure the parameters for wireless according to the descriptions below.
Warning: Ensure that you select a correct country to confirm local law. Incorrect settingsmay cause
interference.