User's Manual

TD-W8901N
150Mbps Wireless N ADSL2+ Modem Router User Guide
 Secure IP Address: Select the IP addresses which are permitted to access to the modem
router remotely. With the default IP 0.0.0.0, any client would be allowed to remotely access
the ADSL modem router.
 Application: Select the application for the ACL rule, and then you can access the modem
router through it.
 Interface: Select the interface for access: LAN, WAN or Both.
 Access Control of Listing: This displays the information about the ACL Rules.
If you select IPv6 as IP version, you will see the screen shown below.
Figure 4-45
 IPv6 ACL: If Activated, the IPv6 addresses which are contained in the Access Control List
can access to the modem router. If Deactivated, all IP addresses can access to the modem
router.
 IPv6 ACL Rule Index: Select the ACL rule index for the entry.
 Active: Enable the ACL rule.
 Secure IPv6 Address: Select the IPv6 addresses which are permitted to access to the
modem router remotely.
 Application: Select the application for the IPv6 ACL rule, and then you can access the
modem router through it.
 Interface: Select the interface for access: LAN, WAN or Both.
 IPv6 Access Control of Listing: This displays the information about the IPv6 ACL Rules.
4.5.2 Filter
Choose “Access Management→Filter”, you can see the Filter screen (the default is IP/MAC
Filter screen shown in Figure 4-46 ). The filtering feature includes IP/MAC Filter, Application Filter,
60
