Specifications

TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
25
Figure 4-19
4.4.2.3 ATM -EoA-Bridging
If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface (see 4.4.1.1 ATM Interface
).
2. Click the Add button on the screen Figure 4-7. Select WAN Service Interface over ATM PVC
on the next screen (as shown Figure 4-8).
3. Select Bridging option for the WAN service type on the screen (as shown Figure 4-9), and
click Next button to continue.
4. On the screen (as shown Figure 4-13) you will see the detailed settings you’ve made. Please
click the Save/Apply button to save these settings.
4.4.2.4 ATM -PPPoA
If your ISP provides a PPPoA connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select PPPoA option for DSL Link Type (see 4.4.1.1
ATM
Interface).
2. Click the Add button on the screen Figure 4-7 and the next configuration is similar to PPPoE,
(see section 4.4.2.1 ATM-EoA-PPPoE
). The difference is that you don’t need to set the
PPPoE Service Name and Bridge PPPoE Frames Between WAN and Local Ports on the
screen of
Figure 4-10.
4.4.2.5 ATM -IPoA
If your ISP provides an IPoA connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface.
1. Add a new ATM interface and select IPoA option for DSL Link Type (see 4.4.1.1
ATM
Interface).
2. Click the Add button on the screen Figure 4-7 and the next configuration is similar to IPoE
(see section 4.4.2.2 ATM-EoA-IPoE
). The difference is that you have to manually set the