Specifications
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Advanced Setup
- 4.5 IPTV
- 4.6 Wireless
- 4.7 Guest Network
- 4.8 Diagnostics
- 4.9 Management
- 4.10 Logout
- Appendix A: Specifications
- Appendix B: Configuring the PC
- Appendix C: Troubleshooting
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
55
SSID: SSID (Wireless network name) shared among all points in a wireless network. The SSID
must be identical for all devices in the wireless network. It is case-sensitive and must not
exceed 32 characters (use any of the characters on the keyboard). Make sure this setting is the
same for all stations in your wireless network. Type the desired SSID in the space provided.
BSSID: Show the MAC address of the router’s wireless network.
Max Clients: The maximum number of wireless clients that can connect to the router.
Click Save/Apply to save your settings.
4.6.2 Security
Choose “Wireless””Se curity”, you will see the screen of Wireless--Se curity settings shown as
below. You can configure security features of the wireless LAN interface by manually setting the
network authentication or through WPS (Wi-Fi Protected Setup) method.
Figure 4-62
4.6.2.1 WPS Setup
This section will guide you to add a new wireless device to an existing network quickly by WPS (or
called QSS) method.
Note:
1) This feature is available only when WPA2-PSK or OPEN mode is configured.