Specifications

TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
56
2) To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function meanwhile.
I. By PBC
If the wireless adapter supports WPS and the Push Button Configuration (PBC) method, you can
add it to the network by PBC with the following two methods. Click Push-Button radio box, you
will see the screen as shown below.
Figure 4-63
Method One: Hardware push button.
Step 1: Press the WPS/RESET button on the back panel of the router.