User's Manual

TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-5
Step 3: Select the Connection Type given by your ISP(Internet Service Provider), and then click
NEXT.
Figure 3-6
Step 4: There are four connection types: Dynamic IP Address, Static IP Address, PPPoE/PPPoA
and Bridge Mode. Please choose the connection type that your ISP provides. After that,
you should follow the configuration below to proceed.
1) Select Dynamic IP Address in Figure 3-6, the next screen will appear as shown in
Figure 3-7. Configure the following options provided by your ISP: VPI, VCI and
Connection T
ype. Then click NEXT.
13