User's Guide

TD-W8960N Wireless N ADSL2+ Modem Router User Guide
)
Note:
If you select the Enable NAT checkbox, the NAT menu will be added to the Web-based Utility. We
will describe the detailed configuration in 4.4.5
NAT.
6. Click the Next button, and select a preferred wan interface as the system default gateway.
Figure 4-18
7. Configure the DNS Server Addresses on the screen as follows.
Figure 4-19
)
Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
9. On the next screen (as shown Figure 4-14) you will see the detailed settings you’ve made.
Please click the Apply/Save button to save these settings.
4.4.2.3 ATM-EoA-Bridge
If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
26