User's Guide

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-43
Click the Add button in Figure 4-43, and you can configure the QoS queue entry on the next
screen as shown in Figure 4-44.
Figure 4-44
¾ Name: Set a name for the entry.
¾ Enable: Select Enable option to take this entry effect.
¾ Interface: Assigned a specific Wan Service for this QoS queue entry.
¾ Precedence: Specify precedence for this QoS queue entry.
¾ DSL Latency: Select latency path for the type of data transmission, only Path0 is available for
this Router.
After you specify the condition, click Save/Apply to save the entry and then you will see you
settings as shown in Figure 4-43.
49