User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Advanced Setup
- 4.5 Wireless
- 4.6 Diagnostics
- 4.7 Management
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Technical Support
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-46
After you specify the condition, click Save/Apply to save the entry.
4.4.9 Bandwidth Control
Choose “Advanced Setup”“Bandwidth Control” and then you will see the screen as shown in
Figure 4-47. This page allows you to enable this function and to configure the value of Total
Upstream/Downstream Bandwidth.
Figure 4-47
Enable Bandwidth Control: Check this box to enable the Bandwidth Control function.
Total Upstream Bandwidth (Kbps): Enter the upload speed through the WAN port.
Total Downstream Bandwidth (Kbps): Enter the download speed through the WAN port.
Save/Apply: Click this button to make the configuration take effect.
44