User's Manual

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
20
re-establish the connection as soon as you attempt to access the Internet again. If your
Internet is charged by time you may want to select this option in order to save money.
 Bridge PPPoE Frames Between WAN and Local Ports: Select this option to enable PPP
connection in your local PC.
 Enable IGMP Multicast Proxy: IGMP (Internet Group Management Protocol) is used to
manage multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote
configuration for client devices, such as the router. The default value is enabled, and if you
are not sure, please contact your ISP or just leave it.
5. Select a preferred wan interface as the system default gateway in Figure 4-11 and click Next.
Figure 4-11
6. Configure the DNS Server Addresses on the screen below and click Next.
Figure 4-12
 Select DNS Server Interface from available WAN Interfaces: You can select this option to
automatically get DNS server information from the selected WAN interface.
 Use the following Static DNS IP Address: You can select this option to manually enter the
primary and /or optional secondary DNS server IP addresses provided by your ISP.

Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
7. On the next screen you will see the detailed settings you’ve made. Please click the
Save/Apply button to save these settings.