User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Advanced Setup
- 4.5 IPTV
- 4.6 Wireless
- 4.7 Guest Network
- 4.8 Diagnostics
- 4.9 Management
- 4.10 Logout
- Appendix A: Specifications
- Appendix B: Configuring the PC
- Appendix C: Troubleshooting
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
67
WPA2 Preauthentication: Select Enable from the drop-down list, Stations will authenticate
with the AP during the scanning process, and once association is required, the station has
been already authenticated.
Network Re-auth Interval: Enter a value in seconds as the frequency interval to enable
periodic Network Re-authentication function, while leave it blank or enter “0” to disable it.
5. WPA2 -PSK
To configure WPA2 -PSK settings, select the WPA2 -PSK option from the drop-down list. The
menu will change to offer the appropriate settings. WPA2 -PSK requires a shared key and does
not use a separate server for authentication. PSK keys can be ASCII or Hex type.
Figure 4-81
6. Mixed WPA2/WPA
To configure Mixed WPA2/WPA settings, select the Mixed WPA2/WPA option from the drop-down
list. The menu will change to offer the appropriate settings. The steps to these settings are similar
to those for WPA-PSK.
Figure 4-82
7. Mixed WPA2/WPA -PSK
To configure Mixed WPA2/WPA -PSK settings, select the Mixed WPA2/WPA -PSK option from the
drop-down list. The menu will change to offer the appropriate settings. The steps of this setting are
the same with WPA-PSK.