User's Manual

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
79
Figure 4-102
 Refresh: Click the button, the information in the table will be updated.
 Back: Click the button, the screen will back to the previous page.
To Configure the System Log Settings:
Click the Configure System Log button (shown in Figure 4-101), you will see the screen below
(shown in Figure 4-103).
Figure 4-103
 Disable/Enable: Select the Enable to log the events, if you don’t want to log these events,
please select Disable.
 Log Level: Select the Log level in the drop-down list, for the Log level, all events above or
equal to the selected level will be logged.
 Display Level: Select the Display level in the drop-down list, for the Display Level, all logged
events above or equal to the selected level will be displayed.
 Mode: Select the mode to record the events. If the selected mode is Local, events will be
recorded in the local memory. If the selected mode is Remote, events will be sent to the
specified IP address and UDP port of the remote system log server. If the selected mode is
Both, events will be sent to the local memory and the remote system log server.
4.9.3 SNMP Agent
Choose “Management”“SNMP Agent”, you can see the SNMP-Configuration screen as shown
below.