User's Manual

TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide
5
2.2 The Back Panel
LAN LAN LAN LAN
Figure 2-2
 POWER: The Power plug is where you will connect the power adapter.
 ON/OFF: The switch for the power.
 WiFi: The button for the wireless function.
 WPS/RESET: The switch for the WPS function. If your client devices, such as wireless
adapters, support Wi-Fi Protected Setup, then you can press this button for about two
seconds to quickly establish a connection between the router and client devices and
automatically configure wireless security for your wireless network. For details, please refer
to WPS Settings
. If you press this button for more than 8 seconds, you will enable the RESET
function. There are two ways to reset the modem router's factory defaults.
Method one: With the modem router powered on, press and hold down the WPS/RESET
button on the rear panel for at least 8 seconds until some LEDs go off, then release the
button.