User's Manual

TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide
6
Method two: Restore the default setting from “Maintenance-SysRestart” of the modem
router's Web-based Utility.
 LAN 1, LAN 2, LAN 3, LAN 4: Through the port, you can connect the modem router to your
PC or the other Ethernet network devices.
 ADSL: Through the port, you can connect the modem router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to 2.4 Connecting the
Modem Router.
 Antennas: Used for wireless operation and data transmit.
2.3 Installation Environment
 The Product should not be located where it will be exposed to moisture or excessive heat.
 Place the modem router in a location where it can be connected to the various devices as
well as to a power source.
 Make sure the cables and power cord are safely placed out of the way so they do not create a
tripping hazard.
 The modem router can be placed on a shelf or desktop.
 Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
Generally, the modem router is placed on a horizontal surface. The device also can be mounted
on the wall as shown in the following figure.

Note:
The diameter of the screw, 3.5mm<D<7.8mm, and the distance of two screws is 107.5mm. The
screw that project from the wall need around 4mm based, and the length of the screw need to be
at least 20mm to withstand the weight of the product.