User's Manual

TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide
41
Figure 4-10
 6rd IPv6 Prefix: Enter the prefix of the IPv6.
 IPv4 Mask Length: The length of the selected WAN connection’s IPv4 mask.
 6RD Border Relay IPv4Addr: The IPv4 address of the border relay router of 6RD tunnel.
 Use PVC: Select the PVC from the drop-down list.
 Note:
To enable the function, there should not be any IPv6 WAN connections.
4.3.5 Guest Network
Choose “Interface Setup→Guest Network” menu, and you will see the Guest Network screen.
This feature allows you to create a separate network for your guests without allowing them to
access your main network and the computers connected to it.
Figure 4-
11
You can enable or disable Guest Network. The default setting is disabled. When you enable this
function, you could set wireless parameters for Guest Network.