User's Manual

TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
4
Chapter 2 Hardware Installation
2.1 The Front Panel
Figure 2-1
The LEDs locate on the front panel. They indicate the device’s working status. For details, please
refer to LED Explanation.
LED Explan
ation:
Name Status Indication
On
System initialization complete.
Flash
System initializing or firmware upgrading is in process. Do not
disconnect or power off the modem router.
(Power)
Off
Power is off.
On
ADSL line is synchronized and ready to use.
Flash
The ADSL negotiation is in progress.
(ADSL)
Off
ADSL synchronization fails. Please refer to Note 1
for
troubleshooting.
On
Internet connection is available.
Flash
There is data being transmitted or received via the Internet.
(INTERNET)
Off
No Internet connection or the modem router is operating in
Bridge mode. Please refer to Note 2
for troubleshooting.
On The wireless function is enabled.
Flash
The modem router is sending or receiving data over the
wireless network.
(Wireless)
Off The wireless function is disabled.
On
A wireless device has been successfully added to the network
by WPS function.
Flash
A wireless device is trying to connect to the network via WPS.
This process may take up to 4 minutes.
(WPS)
Off
The WPS function is disabled or the wireless device fails to be
added to the network in 4 minutes after WPS function is
enabled. Please refer to WPS Settings
for more information.