User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Software Configuration
- Appendix A: Specifications
- Appendix B: Configuring the PC
- Appendix C: Troubleshooting
TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
5
Name Status Indication
On
The corresponding LAN port is connected.
Flash
The modem router is sending or receiving data over this LAN
port.
(LAN1-4)
Off
The corresponding LAN port is not connected.
Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.4 Connecting
the Router for more information about how to make Internet connection correctly. If you have
already made a right connection, please contact your ISP to make sure if your Internet service
is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off,
please refer to Note 1
. If your ADSL LED is on, please check your Internet configuration. You
may need to check this part of information with your ISP and make sure everything have been
input correctly. Refer to 4.1.1 Device Info
and 4.3.1 Internet for more information.
2.2 The Back Panel
LAN LAN LAN LAN
Figure 2-2