User's Manual

TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
6
 POWER: The Power plug is where you will connect the power adapter.
 ON/OFF: The switch for the power.
 WiFi: The button for the wireless function. The switch for the WPS function. For details,
please refer to WPS Settings
.
 WPS/RESET: If your client devices, such as wireless adapters, support Wi-Fi Protected
Setup, then you can press this button for about two seconds to quickly establish a connection
between the router and client devices and automatically configure wireless security for your
wireless network. If you press this button for more than 5 seconds, you will enable the
RESET function. There are two ways to reset the modem router's factory defaults.
Method one: Pressing this button for more than 5 seconds enables the Reset function. With
the router powered on, press and hold the WPS/RESET button (approximately 8 seconds)
until all LEDs are lit. And then release the button and wait for the router to reboot to its factory
default settings.
Method two: Restore the default setting from “Maintenance-SysRestart” of the modem
router's Web-based Utility.
 LAN 1, LAN 2, LAN 3, LAN 4: Through the port, you can connect the modem router to your
PC or the other Ethernet network devices.
 ADSL: Through the port, you can connect the modem router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to 2.4 Connecting the
Modem Router.
 Antennas: Used for wireless operation and data transmit.
2.3 Installation Environment
 The Product should not be located where it will be exposed to moisture or excessive heat.
 Place the modem router in a location where it can be connected to the various devices as
well as to a power source.
 Make sure the cables and power cord are safely placed out of the way so they do not create a
tripping hazard.
 The modem router can be placed on a shelf or desktop.
 Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
Generally, the modem router is placed on a horizontal surface. The device also can be mounted
on the wall as shown in the following figure.