User's Manual

TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
40
Figure 4-
11
You can enable or disable Guest Network. The default setting is disabled. When you enable this
function, you could set wireless parameters for Guest Network.
 Guest SSID: The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network.
 Authentication Type: Select the Authentication Type from the drop-down list.
 Encryption: You can select either AES or AES+TKIP.
 Wireless Password: You may personalize your guest network password by entering a new
password.
 Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 Allow Guests to access Local Network: The guests have access to your Local Network,
but cannot login the modem router’s web management interface.
 Guest Network Isolation: This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.