User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W89
68 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
There ar
e three states of the print server, they are as follows:
¾
Online: Indicates
the print service has been turned on, and no user is using the print
services at present. You can click the "Stop" button to stop the print service.
¾
Offline: Indicates the print service featur
e is disabled. You can click "Start" button to start
the print service.
¾
Bus
y: Indicates the print service has been turned on, but at this moment other users are
using print services.
4.10 Diagnostics
Choose “Diagnostics”, you will see the Diagnostics
screen. This section describes the result of
the test for the ENET (Ethernet) Connection, Wireless Connection and ADSL Synchronization.
You can refer to the Help menu to get more information about the corresponding test.
Figure 4-
115
4.11 Manage
ment
Choose “Management”, there are ei
ght submenus under the main menu. They are Settings,
System Log, SNMP Agent, TR-069 Client, Internet Time, Access Control, Update Firmware
and Reboot. Click any of them, and you will be able to configure the corresponding function.
91