User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W89
68 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
1.3 Panel La
yout
1.3.1 The Front Panel
The modem router’s LED
s are located on the front panel (View from left to right).
Figure 1-
1
LED Explanation:
Name Status Indication
On
The modem router is pow
ered on.
(Power
)
Off
The modem router is off. Please ensure that the power adapter is
connected correctly.
On
ADSL line is
synchronized and ready to use.
Flash
The ADSL negotiation is in progr
ess.
(ADSL)
Off
ADSL synchronization
fails. Please refer to Note 1
for
troublesho
oting.
On
The network
is available with a successful Internet connection.
Flash
There is data being transmitted or received vi
a the Internet.
(Internet)
Off
There is no successful
Internet connection or the modem router
is operating in Bridge mode. Please refer to Note 2
fo
r
troubleshooting.
On Wireless is enabled b
ut no data is being transmitted.
Flash
The modem
router is sending or receiving data over the wireless
network.
(WLAN)
Off Wireless is disabled.
On
A wireless device has be
en successfully added to the network by
WPS function.
Slow Flash
WPS handshaking is in process and will continue for about
2
minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
(WPS)
Quick
Flash
A wireless device has failed to be a
dded to the network by WPS
function. Please refer to 4.6.2.1 WPS Setup for more
information.
(USB) On A storage de
vice or printer has connected to the USB port.
4