User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W89
68 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
¾ 3G Router Mode: In this mode, the
device allows multi-users to share a 3G mobile broadband
connection via wired or wireless connection.
)
Note:
If you are unwilling to configure WAN Service now,
you can click the Skip WAN button. Then you
can configure WAN service referring to 4.4.1 Layer2 Interface
.
Step 5. Configur
e parameters for WAN connection. For ADSL Modem Router Mode and
Wireless Router Mode, 3G Router Mode
z If ADSL Modem Router Mode is chosen, please select your Country and ISP from the
drop-down list, and enter related parameters provided by your ISP. Then click Next. Here we
use PPPoE as an example.
Figure 3-8
)
Note:
If your count
ry or ISP is not listed, please select Other. Then you can manually enter the VPI/VCI
values and select Encapsulation Mode provided by your ISP.
z If Wireless Router Mode is chosen, please select WAN Link Type provided by your ISP and
enter the related parameters, then click Next. Here we use PPPoE as an example.
12
The country code selection is for non-US model only and is not available to all US model. Per FCC
regulation, all WiFi product marketed in US must fix to US operation channels only.