User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W89
68 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
C
lick Save/Apply to make the configuration take effect.
)
Note:
In this type,
there should not have any IPv4 WAN connections. If there are IPv4 WAN connections,
the page will prompt you to delete all the IPv4 WAN connections.
4.5.17 IPSec
Choose “Ad
vanced Setup”Æ“IPSec”, you can Add/Remove or Enable/Disable the IPSec tunnel
connections on the screen as shown in Figure 4-68.
Figure 4-
68
This section will guide you to configure a VPN tunnel between two TD-W8968s. The topology is as
follows.
)
Note:
You could al
so use other VPN routers to set VPN tunnels with TD-W8968N. TD-W8968N supports
up to 10 VPN tunnels simultaneously.
59