User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W89
68 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-
91
¾ WPA2 Preauthentication: Select Enable from the drop-down list, Stations will authenticate
with the AP during the scanning process, and once association is required, the station has
been already authenticated.
¾ Network Re-auth Interval: Enter a value in seconds as the frequency interval to enable
periodic Network Re-authentication function, while leave it blank or enter “0” to disable it.
5. WPA2-Personal
To configure WPA2-Personal settings, select the WPA2- Personal option from the drop-down list.
The menu will change to offer the appropriate settings. WPA2- Personal requires a shared key
and does not use a separate server for authentication. PSK keys can be ASCII or Hex type.
Figure 4-
92
6. Mixed WPA2/WPA Enterprise
To configure Mixed WPA2/WPA Enterprise settings, select the Mixed WPA2/WPA Enterprise
option from the drop-down list. The menu will change to offer the appropriate settings. The steps to
these settings are similar to those for WPA-PSK.
76