User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W89
68 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-
103
You can enable or disable Guest Network. When you enable this function, you could set wireless
parameters for Guest Network.
¾
Guest SSID: The guest network na
me. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network.
¾
Authenticati
on Type: Select the Authentication Type from the drop-down list.
¾
Encry
ption: You can select either AES or AES+TKIP.
¾
Wireless Pa
ssword: Here display the default wireless password, you can click Click here to
display to see the default wireless password, and you can also enter ASCII characters
between 8 and 63 characters or 8 to 64 Hexadecimal characters to create a new password.
¾
Group Key
Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
¾
Allo
w Guest to Access my Local Network: The guests have access to your Local Network,
but can not login the modem router’s web management interface.
¾
Allo
w Guest to Access my USB Storage: The guests can access the specified files on the
USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to 4.8.3 Storage Sharing
.
¾
Guest Net
work Isolation: This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
¾
Guest Net
work Bandwidth Control: With this function, you can configure the Upstream
Bandwidth and Downstream Bandwidth for guest network.
Click Save/Apply to save your settings.
4.8.2 Station list
Choose me
nu “Guest Network”Æ“Station list”, you can see the MAC Address, Associated,
Authorized, SSID and Interface.
83