User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
RESET: There are two ways to reset the modem router's factory defaults.
1) Use the Restore Default function on Management -> settings -> Restore Default page in
the modem router's Web-based Utility.
2) Use the Factory Default RESET button: With the modem router powered on, use a pin to press
and hold the RESET button for at least 5 seconds. And the modem router will reboot to its
factory default settings.
WPS: The switch for the WPS function. For details, please refer to 4.6.2.1 WPS Setup
.
ON/OFF: The switch for the power.
POWER: The Power plug is where you will connect the power adapter.
Wireless Antennas: To receive and transmit the wireless data.
6