User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Product Overview
- Chapter 2. Connecting the Modem Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Modem Router
- 4.1 Login
- 4.2 Device Info
- 4.3 Quick Setup
- 4.4 Operation Mode
- 4.5 Advanced Setup
- 4.6 IPTV
- 4.7 Wireless
- 4.8 Guest Network
- 4.9 USB Settings
- 4.10 Diagnostics
- 4.11 Management
- 4.12 Logout
- Appendix A: Specifications
- Appendix B: Troubleshooting
- Appendix C: Technical Support
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4.5.9.2 QoS Classification
This section will guide you to create a traffic class rule to classify the upstream traffic, assign
queue which defines the precedence and the interface and optionally overwrite the IP header
DSCP byte.
A rule consists of a class name and at least one condition below. All of the specified conditions in
this classification rule must be satisfied for the rule to take effect.
Figure 4-47
Click the Add button Figure 4-47, and you can configure the QoS on the next screen.
Figure 4-48
After you specify the condition, click Save/Apply to save the entry.
4.5.10 Bandwidth Control
Choose “Advanced Setup”“Bandwidth Control” and then you will see the screen as shown in
Figure 4-49. This page allows you to enable this function and to configure the value of Total
Upstream/Downstream Bandwidth.
48