User's Manual

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
according to their min upstream/downstream rate. The greater a rule’s min upstream/downstream
rate is, the more bandwidth it gets.
4.5.11 Routing
Choose “Advanced Setup”“Routing”, it includes three menus: Default Gateway, Static Route
and RIP. The detailed descriptions are provided below.
4.5.11.1 Default Gateway
Choose “Advanced Setup”“Routing”“Default Gateway”, you can see the Default Gateway
screen.
Figure 4-53
4.5.11.2 Static Route
Choose “Advanced Setup”“Routing”“Static Route”. You can see the Static Route screen,
this screen allows you to configure the static routes (shown in Figure 4-54). A static route is a
pre-determined path that network information must travel to reach a specific host or network.
Figure 4-54
To add static routing entries:
1. Click the Add button in Figure 4-54, and you will see the screen as shown in Figure 4-55.
51