User's Guide

TD-W8970
30
0Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide

Note:
After you finish the Internet configuration, please click Save to make the settings take effect.
4.5.2 3G/4G Settings
If your modem router is in 3G/4G Router Mode, choose menu “Network→3G/4G Settings”, you
can configure parameters for 3G/4G function on the screen below. To use the 3G/4G function, you
should first insert your USB modem on the USB port of the modem router. There is already much
3G/4G USB modem information embedded in the modem router. If your USB modem is supported
by the modem router, then “Identify successfully” will display in the USB 3G/4G Modem field.
Select the correct Location and Mobile ISP manually, the USB modem parameters will be set
automatically.
Some 3G/4G USB modem may not be supported by the modem router. For more information,
please refer to Compatibility List on our website: www.tp-link.com
. If your 3G/4G USB modem is
incompatible with our modem router, please contact our technical support.
Figure 4-11

Mobile ISP: Please select the ISP (Internet Service Provider) you apply to for 3G/4G service.
The modem router will show the default Dial Number and APN of that ISP.

Set the Dial Number, APN, Username and Password manually: Check the box and fill the
Dial Number and APN blanks below if your ISP is not listed in the Mobile ISP list or the default
values are not the latest ones.

Dial Number: Enter the Dial Number provided by your ISP.

APN: Enter the APN (Access Point Name) provided by your ISP.

Username/Password: Enter the Username and Password provided by your ISP. These fields
are case-sensitive.

Always on: Connect automatically after the modem router is disconnected. This option is
enabled by default.
26