User's Manual

TD-W9970
300Mbps Wireless N USB VDSL2 Modem Router User Guide
1.3.2 The Back Panel
Figure 1-2
 VDSL: Through the port, you can connect the modem router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to
2.3 Connecting the
Modem Router.
 LAN4/WAN, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to
your PC or the other Ethernet network devices. In wireless router mode you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
 USB: The USB port connects to a USB storage device, a USB printer or a 3G/4G Modem.
 WiFi: The switch for the WiFi function. Press the button to enable/disable the WiFi function.
 WPS/RESET: The switch for the WPS function or resetting the modem router.
• WPS function: For details, please refer to 4.8.2 WPS Settings.
• Reset the modem router: There are two ways to reset the modem router's factory
defaults.
Method one: With the modem router powered on, use a pin to press and hold the
WPS/Reset button for at least 5 seconds. And the modem router will reboot to its factory
default settings.
Method two: Restore the default setting from 4.22.7 Factory Defaults
of the modem
router's Web-based management page.
 ON/OFF: The switch for the power.
 POWER: The Power plug is where you will connect the power adapter.
 Antennas: Used for wireless operation and data transmit.
6