User's Manual

TD-W9970
300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-31
 IPSec Connection Name: Enter a name for your VPN.
 Remote IPSec Gateway Address (URL): Enter the destination gateway IP address in the box
which is the public WAN IP or Domain Name of the remote VPN server endpoint. (For example:
Input 219.134.112.247 in Device1, Input 219.134.112.246 in Device 2)
 Tunnel access from local IP addresses: Choose Subnet if you want the Whole LAN to join
the VPN network, or else choose Single Address if you want single IP to join the VPN network.
 IP Address for VPN: Enter the IP address of your LAN. (For example: Input 192.168.1.1 in
Device1, Input 192.168.2.1 in Device2)
 IP Subnetmask: Enter the Subnet mask of your LAN. ( For example: Input 255.255.255.0 in
both Device1 and Device2)
 Tunnel access from remote IP addresses: Choose Subnet if you want the Remote Whole
LAN to join the VPN network, or else choose Single Address if you want single IP to join the
VPN network.
 IP Address for VPN: Enter the IP address of the Remote LAN. (For example: Input
192.168.2.1 in Device1,Input 192.168.1.1 in Device2)
 IP Subnetmask: Enter the subnetmask of the remote LAN. ( For example: Input
255.255.255.0 in both Device1 and Device2)
 Key Exchange Method: Select Auto (IKE) or Manual.
If you select Auto as Key Exchange Method, the screen will display as follows:
46